Chapter 4 Tutorials
AMG1202-T10A User’s Guide
38
1 Click Network > Wireless LAN to open the AP screen. Configure the screen using the provided
parameters (see page 37). Click Apply.
2 Click the Advanced Setup button and select 802.11b+g+n in the 802.11 Mode field. Click
Apply.
Thomas can now use the WPS feature to establish a wireless connection between his notebook and
the ZyXEL Device (see Section 4.2.2 on page 38). He can also use the notebook’s wireless client to
search for the ZyXEL Device (see Section 4.2.3 on page 42).
4.2.2 Using WPS
This section shows you how to set up a wireless network using WPS. It uses the ZyXEL Device as
the AP and ZyXEL NWD210N as the wireless client which connects to the notebook.
Note: The wireless client must be a WPS-aware device (for example, a WPS USB adapter
or PCMCIA card).
To Next Page
Loading...
