AMG1202-T10A User’s Guide 169
CHAPTER 16
Remote Management
16.1 Overview
Remote management allows you to determine which services/protocols can access which ZyXEL
Device interface (if any) from which computers.
The following figure shows remote management of the ZyXEL Device coming in from the WAN.
Figure 88 Remote Management From the WAN
Note: When you configure remote management to allow management from the WAN, you
still need to configure a firewall rule to allow access.
You may manage your ZyXEL Device from a remote location via:
• Internet (WAN only)
•LAN only
•LAN and WAN
• None (Disable)
To disable remote management of a service, select Disable in the corresponding Service Access
field.
You may only have one remote management session running at a time. The ZyXEL Device
automatically disconnects a remote management session of lower priority when another remote
management session of higher priority starts. The priorities for the different types of remote
management sessions are as follows.
1 Teln et
2 HTTP
LAN
WAN
HTTP
Telnet
To Next Page
Loading...
