ZyXEL Communications AMG1202-T10A - Configuring Static Route for Routing to Another Network

Chapter 4 Tutorials
AMG1202-T10A User’s Guide
46
3 Select Active MAC Filter and Deny Filter Action. Enter the MAC address you found in the Client
List screen. Click Apply.
Josephine will no longer be able to access the Internet through the ZyXEL Device.
4.4 Configuring Static Route for Routing to Another
Network
In order to extend your Intranet and control traffic flowing directions, you may connect a router to
the ZyXEL Device’s LAN. The router may be used to separate two department networks. This
tutorial shows how to configure a static routing rule for two network routings.
In the following figure, router R is connected to the ZyXEL Device’s LAN. R connects to two
networks, N1 (192.168.1.x/24) and N2 (192.168.10.x/24). If you want to send traffic from