ZyXEL Communications AMG1202-T10A - Installing Upnp in Windows Example

Chapter 17 Universal Plug-and-Play (UPnP)
AMG1202-T10A User’s Guide
180
17.3 Installing UPnP in Windows Example
This section shows how to install UPnP in Windows Me and Windows XP.
Installing UPnP in Windows Me
Follow the steps below to install the UPnP in Windows Me.
1 Click Start and Control Panel. Double-click Add/Remove Programs.
2 Click on the Windows Setup tab and select Communication in the Components selection box.
Click Details.
Add/Remove Programs: Windows Setup: Communication
Apply Click this to save your changes.
Cancel Click this to restore your previously saved settings.
Table 69 Advanced > UPnP > General
LABEL DESCRIPTION