Chapter 2 The Web Configurator
AMG1202-T10A User’s Guide
28
5 The following screen displays if you have not yet changed your password. It is strongly
recommended you change the default password. Enter a new password, retype it to confirm and
click Apply; alternatively click Ignore to proceed to the main menu if you do not want to change
the password now.
Figure 5 Change Password Screen
6 Select Go to Wizard setup and click Apply to display the wizard main screen. Otherwise, select
Go to Advanced setup and click Apply to display the Status screen.
Figure 6 Replace Factory Default Certificate Screen
Note: For security reasons, the ZyXEL Device automatically logs you out if you do not use
the web configurator for five minutes (default). If this happens, log in again.
To Next Page
Loading...
