Dimension ES-3124 Ethernet Switch
29-2 Command Examples
An example is shown next.
Figure 29-2 sys version Command Example
29.2.4 sys monitor status
Syntax:
sys monitor status
This command shows the hardware monitor’s status.
An example is shown next.
Figure 29-3 sys monitor status Command Example
29.2.5 sys sw vlan1q vlan list
Syntax:
sys sw vlan1q vlan list <all|VID|start_VID|end_VID>
where
<all|VID|start
_VID|end_VID>=
Specify either all of the VLAN entries (
all), a single VLAN ID (VID) or a
range of VLAN IDs starting from a certain VID (
start_VID) or a range
of VLAN Ids ending at a specific VID (
end_VID).
This command displays the IEEE 802.1Q tagged VLAN table. An example is shown next.
Figure 29-4 sys sw vlan1q vlan list Command Example
ES-3124> sys version
ZyNOS version: V3.50(TP.0) | 10/01/2004
romRasSize: 2092220
system up time: 0:08:16 (c20c ticks)
bootbase version: V0.6 | 10/01/2004
ZyNOS CODE: RAS Sep 18 2004 17:25:37
Product Model: ES-3124
CPU chip revision: 1
CPU chip clock: 266MHz
CPU core revision: 0
ES-3124>
ES-3124> sys monitor status
Time VCOREA VINRO 3.3VIN 12VIN 1.3VIN 1.25VIN 1.8VIN MAC CPU PHY
F00 F01 F02 Error
---------- ------ ------ ------ ------ ------ ------ ------ ----- ----- ----- ----- ----- ----- --------
538 2.528 1.216 3.328 12.038 1.328 1.232 1.824 38.5 35.0 33.0 5859 5908 5810 00000000
E
-
124>
ES-3124> sys sw vlan1q vlan list all
No. VID ElapsedTime Status EgressPort/UntaggedPort
------ ---- ----------- ------ --------------------------------
1) 1 2:37:35 Static EEEEE|EEEEE|EEEEE|EEEEE|EEEEE|EEE
UUUUU|UUUUU|UUUUU|UUUUU|UUUUU|UUU
ES-3124>