ZyXEL Communications Dimension ES-3124 - Ip Ping; Ip Route Status; Ip Arp Status; Figure 29-8 IP PING Command Example

Dimension ES-3124 Ethernet Switch
Command Examples 29-5
29.4.1 ip ping
Syntax:
ip ping <hostid>
This command pings a remote host. An example is shown next.
Figure 29-8 IP PING Command Example
29.4.2 ip route status
Syntax:
ip route status
This command displays the routing table. An example is shown next.
Figure 29-9 ip route status Command Example
29.4.3 ip arp status
Syntax:
ip arp status
This command displays all interfaces’ IP Address Resolution Protocol (ARP) status. An example is shown next.
Figure 29-10 ip arp status Command Example
ES-3124> ip ping 192.168.1.10
Resolving 192.168.1.10... 192.168.1.10
sent rcvd rate rtt avg mdev max min
1 1 100 0 0 0 0 0
2 2 100 0 0 0 0 0
3 3 100 0 0 0 0 0
ES-3124> ip route status
Dest FF Len Device Gateway Metric stat Timer Use
192.168.0.0 00 24 enet0 192.168.0.1 1 041b 0 0
192.168.1.0 00 24 swp00 192.168.1.1 1 041b 0 6
172.16.0.0 00 16 swp00 192.168.1.2 2 801b 0 0
127.0.0.0 00 8 swp00 127.0.0.1 1 041b 0 0
default 00 0 enet0 192.168.0.1 2 801b 0 0
ES-3124>
ES-3124> ip arp status
received 1 badtype 0 bogus addr 0 reqst in 0 replies 1 reqst out 4 bad VID 0
cache hit 29 (0%), cache miss 8366 (99%)
IP-addr Type Time Addr stat iface channel
192.168.1.1 Ethernet 0 00:a0:c5:3f:91:56 43 NULL NULL
num of arp entries= 1
ES-3124>