ES-2024A User’s Guide
152 Chapter 27 Introducing the Commands
27.9.1 User Mode
The following table describes the commands available for User mode.
27.9.2 Enable Mode
The following table describes the commands available for Enable mode.
Table 56 Command Summary: User Mode
COMMAND DESCRIPTION
enable
Accesses Enable (or privileged) mode. See Section 27.9.2
on page 152.
exit
Logs out from the CLI.
help
Displays help information.
history
Displays a list of previously command(s) that you have
executed. The switch stores up to 256 commands in
history.
logout
Exits from the CLI.
ping <IP|host-name>
Sends Ping request to an Ethernet device.
<IP|host-name> [vlan
<vlan-id>]
[size <0-1472>]
[-t]
Sends Ping request to an Ethernet device in the specified
VLAN(s) with the specified parameters.
help
Displays command help information.
show ip
Displays IP related information.
system-information
Displays general system information.
ssh <1|2> <[user@]dest-ip>
Connects to an SSH server with the specified SSH version.
traceroute <ip|host-name>
Determines the path a packet takes to a device.
<ip|host-name>
[vlan <vlan-id>]
[ttl <1-255>]
[wait <1-60>]
[queries <1-10>]
Determines the path a packet takes to a device in a VLAN.
help
Displays command help information.
Table 57 Command Summary: Enable Mode
COMMAND DESCRIPTION
baudrate <1|2|3|4|5>
Changes the console port speed. Choices
are 1 (9600), 2 (19200), 3(38400), 4
(57600) and 5 (115200).
boot config
Restarts the system.
configure
Accesses Configuration mode. See
Section 27.9.3 on page 155.
disable
Exits Enable (or privileged) mode.
To Next Page
Loading...
