ZyXEL Communications ES-2024A - Disable VLAN; Show VLAN Setting; Figure 138 Show Vlan Command Example

ES-2024A User’s Guide
Chapter 29 IEEE 802.1Q Tagged VLAN Commands 191
29.7 Disable VLAN
Syntax:
vlan <vlan-id>
inactive
This command disables the specified VLAN ID in the SVLAN (Static VLAN) table.
29.8 Show VLAN Setting
Syntax:
show vlan
This command shows the IEEE 802.1Q Tagged SVLAN (Static VLAN) table.
An example is shown next.
•For the
AdCtl section of the last column, “-“ is a port set to normal, “x” is a forbidden
port and “F” is a fixed port.
•For the
TagCtl section of the last column, “T“ is a tagged port, “U” is an untagged port.
Figure 138 show vlan Command Example
ras# show vlan
802.1Q VLAN Static Entry:
idx. Name VID Active AdCtl / TagCtl
---- ------------ ---- -------- ------------------------
0 1 1 active FFFFFFFFFFFFFFFFFFFFFFFF
UUUUUUUUUUUUUUUUUUUUUUUU
1 2 active ------------------------
TTTTTTTTTTTTTTTTTTTTTTTT
ras#