ZyXEL Communications ES-2024A - Qos Priority; Name; Figure 123 Egress Set Command Example; Figure 124 Qos Priority Command Example

ES-2024A User’s Guide
180 Chapter 28 Command Examples
Figure 123 egress set Command Example
28.10.8 qos priority
Syntax:
qos priority <0 .. 7>
where
An example is shown next.
• Enable ports one, three, four and five for configuration.
• Set the IEEE 802.1p quality of service priority as four (4).
Figure 124 qos priority Command Example
28.10.9 name
Syntax:
name <port-name-string>
where
An example is shown next.
• Enable ports one, three, four and five for configuration.
• Set a name for the ports.
ras(config)# vlan-type port-based
ras(config)# interface port-channel 1,3-5
ras(config-interface)# egress set 0,7-9
<0 .. 7>
Sets the quality of service priority for a port.
ras(config)# interface port-channel 1,3-5
ras(config-interface)# qos priority 4
<port-name-string>
Sets a name for your port interface(s).