ES-2024A User’s Guide
Chapter 27 Introducing the Commands 163
egress set <port-
list>
Sets the outgoing traffic port list
for a port-based VLAN.
exit
Exits from the interface port-
channel command mode.
flow-control
Enables interface flow control.
Flow control regulates
transmissions to match the
bandwidth of the receiving port.
frame-type
<all|tagged>
Choose to accept both tagged
and untagged incoming frames
or just tagged incoming frames
on a port.
gvrp
Enables this function to permit
VLAN groups beyond the local
switch.
help
Displays a description of the
interface port-channel
commands.
inactive
Disables the specified port(s) on
the switch.
mirror
Enables port mirroring in the
interface.
dir
<ingress|egress|bo
th>
Enables port mirroring for
incoming, outgoing or both
incoming and outgoing traffic.
Port mirroring copies traffic from
one or all ports to another or all
ports for external analysis.
name <port-name-
string>
Sets a name for the port(s).
Enter a descriptive name (up to
nine printable ASCII
characters).
no bandwidth-limit
Disables bandwidth limit on the
port(s).
bmstorm-limit
Disables broadcast storm
control limit on the port(s).
diffserv
Disables DiffServ on the
port(s).
egress set
Disables outgoing traffic on the
port for port-based VLAN.
flow-control
Disables flow control on the
port(s).
gvrp
Disable GVRP on the port(s).
inactive
Enables the port(s) on the
switch.
mirror
Disables port mirroring on the
port(s).
vlan-trunking
Disables VLAN trunking on the
port(s).
Table 59 interface port-channel Commands (continued)
COMMAND DESCRIPTION
To Next Page
Loading...
