ES-2024A User’s Guide
54 Chapter 6 System Status and Port Statistics
TX Packet This field shows the number of good packets (unicast, multicast and broadcast)
transmitted.
Multicast This field shows the number of good multicast packets transmitted.
Broadcast This field shows the number of good broadcast packets transmitted.
Pause This field shows the number of 802.3x Pause packets transmitted.
Tagged This field shows the number of packets with VLAN tags transmitted.
Rx Packet
The following fields display detailed information about packets received.
RX Packet This field shows the number of good packets (unicast, multicast and broadcast)
received.
Multicast This field shows the number of good multicast packets received.
Broadcast This field shows the number of good broadcast packets received.
Pause This field shows the number of 802.3x Pause packets received.
Error Packet
RX CRC This field shows the number of packets received with CRC (Cyclic Redundant Check)
error(s).
Runt This field shows the number of packets received that were too short (shorter than 64
octets), including the ones with CRC errors.
Distribution
64 This field shows the number of packets (including bad packets) received that were 64
octets in length.
65-127 This field shows the number of packets (including bad packets) received that were
between 65 and 127 octets in length.
128-255 This field shows the number of packets (including bad packets) received that were
between 128 and 255 octets in length.
256-511 This field shows the number of packets (including bad packets) received that were
between 256 and 511 octets in length.
512-1023 This field shows the number of packets (including bad packets) received that were
between 512 and 1023 octets in length.
1024-1518 This field shows the number of packets (including bad packets) received that were
between 1024 and 1518 octets in length.
Giant This field shows the number of packets dropped because they were bigger than the
maximum frame size.
Poll Interval(s) The text box displays how often (in seconds) this screen refreshes. You may change
the refresh interval by typing a new number in the text box and then clicking Set
Interval.
Stop Click Stop to stop port statistic polling.
Table 7 Status: Port Details (continued)
LABEL DESCRIPTION
To Next Page
Loading...
