ZyXEL G-202 User’s Guide
Chapter 4 Wireless Station Mode Configuration 49
CHAPTER 4
Wireless Station Mode
Configuration
This chapter shows you how to configure your G-202 in wireless station mode. See Chapter 5
on page 73 for how to configure the G-202 in access point mode.
4.1 Wireless Station Mode Overview
To set your G-202 in wireless station mode, select Station Mode in any utility screen (refer to
Section 1.2.4 on page 23).
4.1.1 ZyXEL Utility Screen Summary
This section describes the ZyXEL utility screens when the G-202 is in station mode.
Figure 26 ZyXEL Utility Menu Summary: Station Mode
The following table describes the menus.
Table 2 ZyXEL Utility Menu Summary: Station Mode
TAB DESCRIPTION
Station Mode
Link Info Use this screen to see your current connection status, configuration and data rate
statistics.
Site Survey Use this screen to
• scan for a wireless network
• configure wireless security (if activated on the selected network).
• connect to a wireless network.
Profile Use this screen to add, delete, edit or activate a profile with a set of wireless and
security settings.
Adaptor Use this screen to configure a transfer rate, enable power saving and use OTIST
(One-Touch Intelligent Security Technology).
To Next Page
Loading...
