Chapter 8 Port
GS1200 Series User’s Guide
48
Figure 36 Port > Advanced Settings
The following table describes the labels in this screen.
Table 8 Advanced Settings
LABEL DESCRIPTION
Back Click this button to return to the main Port (previous) screen.
Port Isolation
The Current Port
as Uplink Port
Select a port to be the uplink (out-going) port. Each port can only communicate with the
uplink port and cannot communicate with each other. All incoming ports are selected while
only the uplink port is selected. See Section 8.1.1.3 on page 45 for more details.
Otherwise, select Disabled.
Apply Click this button to save your changes to the Switch.
To Next Page
Loading...
