ZyXEL Communications GS1200 SERIES - Page 49

Chapter 8 Port
GS1200 Series User’s Guide
49
Bandwidth Control
Note: This section is NOT available for GS1200-5 and GS1200-5HP v2.
Port This identifies the Ethernet port on the Switch.
Ingress Rate
(kbps)
Specify the maximum bandwidth allowed in kilobits per second (kbps) for the incoming traffic
flow on a port.
Select Unlimited to have the Switch obtain the connection speed of up to 1000 Mbps.
Egress Rate
(kbps)
Specify the maximum bandwidth allowed in kilobits per second (kbps) for the out-going traffic
flow on a port.
Select Unlimited to have the Switch obtain the connection speed of up to 1000 Mbps.
Apply Click this button to save your changes to the Switch.
Table 8 Advanced Settings (continued)
LABEL DESCRIPTION