Chapter 18 IP Source Guard
GS1510 Series User’s Guide
109
DHCP server on the port is recorded in the dynamic binding table. To open this
screen, click Security > IP Source Guard > DHCP Snooping > Port Settings.
Figure 56 Port Settings
The following table describes the labels in this screen.
Table 31 Port Settings
LABEL DESCRIPTION
Port Settings
Port Select a port number (1-16 for GS1510-16, 1-26 for GS1510-24)
to modify its maximum host count.
Maximum Host Count Enter the maximum number of hosts (1-32) that are permitted to
simultaneously connect to a port.
Apply Click this to save any changes to the Switch.
Refresh Click this to reload the screen and reset any changes that were
just made.
Port Status
Port This field displays the port number.
Maximum Host Count This field displays the maximum host count for each port on the
Switch.
To Next Page
Loading...
