Chapter 15 QoS
GS1510 Series User’s Guide
90
The following table describes the labels in this screen.
15.7 Queuing Method
Use the Queuing Method screen to configure the weight value of each queue.
Click Advanced Settings > QoS > Queuing Method to open the following
screen.
Figure 50 Queuing Method
Table 24 Priority/Queue Mapping
LABEL DESCRIPTION
Reset to
default
Click this button to reset the priority to queue mappings to the defaults.
Priority This field displays each priority level. The values range from 0 (lowest
priority) to 7 (highest priority).
Queue ID Select the number of a queue for packets with the priority level.
Apply Click Apply to save your changes.
Refresh Click Refresh to begin configuring the screen afresh.
To Next Page
Loading...
