GS1510 Series User’s Guide
93
CHAPTER 16
Storm Control
This chapter shows you how you can manage bandwidth on each port and set up
broadcast storm control settings using the Storm Control screen.
16.0.1 Broadcast Storm Control Setup
Broadcast storm control limits the number of broadcast, multicast and unknown
unicast (also referred to as Destination Lookup Failure or DLF) packets the Switch
receives per second on the ports. When the maximum number of allowable
broadcast, multicast and unknown unicast packets is reached per second, the
subsequent packets are discarded. Enable this feature to reduce broadcast,
multicast and unknown unicast packets in your network.
Click Advanced Settings > Bandwidth Management > Storm Control to
display the screen as shown next.
Figure 51 Broadcast Storm Control
To Next Page
Loading...
