GS1510 Series User’s Guide
71
CHAPTER 11
EEE
11.1 Overview
This chapter explains the EEE (Energy Efficient Ethernet) screen.
Use this screen to reduce energy consumption over RJ-45 Ethernet Ports during
idle periods.
The hardware devices connected to the ports must also support EEE for this
function to work.
Note: A similar version of this screen appears in Smart Mode. See Section 4.3.1.2 on
page 37.
11.1.1 EEE Screen
Click Advanced Settings > EEE to view the screen as shown.
Figure 38 EEE
The following table describes the labels in this screen.
Table 16 EEE
LABEL DESCRIPTION
EEE Port State Click a port to enable IEEE 802.3az Energy Efficient Ethernet on
that port.
Select All Click this to enable IEEE 802.3az Energy Efficient Ethernet across
all ports.
Deselect All Click this to disable IEEE 802.3az Energy Efficient Ethernet across
all ports.
To Next Page
Loading...
