Chapter 15 QoS
GS1510 Series User’s Guide
91
The following table describes the labels in this screen.
Table 25 Queuing Method
LABEL DESCRIPTION
QoS
Method
Select Weighted Fair Queuing (WFQ), Strict Priority (SP) or Weighted
Round Robin (WRR).
Note: Queue weights can only be changed when Weighted Round
Robin is selected.
Weighted Round Robin scheduling services queues on a rotating basis
based on their queue weight (the number you configure in the queue Weight
field). Queues with larger weights get more service than queues with smaller
weights.
Queue ID This field indicates which Queue (0 to 7) you are configuring. Queue 0 has the
lowest priority and Queue 7 the highest priority.
Weight
Value
You can only configure the queue weights when Weighted Round Robin is
selected. Bandwidth is divided across the different traffic queues according to
their weights.
Note: If you want to use Strict Priority but want to change the weights
for the queues, configure them with Weighted Round Robin
selected first and then change the scheduling method to Strict
Priority.
Apply Click Apply to save the changes back to the Switch.
Refresh Click Refresh to begin configuring this screen afresh.
To Next Page
Loading...
