Chapter 21 Maintenance
GS1510 Series User’s Guide
134
Click Management > Maintenance > System Log to display the screen as
shown next. Click Refresh to update the log and see any available new entires.
Figure 76 System Log
The following table describes the labels in this screen.
Table 41 System Log
LABEL DESCRIPTION
Server IP Enter the IP address of an external syslog server in dotted decimal
notation. Select Enable to use the external syslog server or Disable to
not use it.
Apply Click this to save any changes.
Log Level Select the severity level of the logs to be displayed. For more information,
refer to the Syslog Severity Level table above. Select All to display all
levels.
Show Click this to update the system log with log events of the selected severity
level.
Refresh Click this to update the log and see any available new entires.
To Next Page
Loading...
