Chapter 4 The Web Configurator
GS1510 Series User’s Guide
39
Click Apply to save any changes.
Figure 20 Web Configuration Smart Screen - DHCP Snooping
4.3.1.5 STP (Spanning Tree Protocol)
Use this screen to activate the Spanning Tree Protocol (STP) feature which is used
to prevent loops in the core of your network.
Click the STP tab to open the screen as shown next. Use the OFF or ON button to
globally enable or disable Spanning Tree Protocol for the Switch.
Figure 21 Web Configurator Smart Screen - STP
To Next Page
Loading...
