Chapter 7 Broadband
Nebula Mobile Router User’s Guide
124
7.9 Cellular PLMN Configuration
Each service provider has its own unique Public Land Mobile Network (PLMN) number. Either select PLMN
Auto Selection to have the Zyxel Device connect to the service provider using the default settings on the
SIM card, or manually view available PLMNs and select your service provider.
Click Network Setting > Broadband > Cellular PLMN. The screen appears as shown next.
Figure 70 Network Setting > Broadband > Cellular PLMN
The following table describes the labels in this screen.
After selecting to disable the following warning appears. Click OK to continue.
Figure 71 Network Setting > Broadband > Cellular PLMN > Manual Scan Warning
Click Scan to check for available PLMNs in the area surrounding the Zyxel Device, and then display
them in the network list. Select from the network list and click Apply.
Table 35 Network Setting > Broadband > Cellular PLMN
LABEL DESCRIPTION
PLMN Management
PLMN Auto Selection Click to enable ( ) and have the Zyxel Device automatically connect to the first
available mobile network.
Select disabled to display the network list and manually select a preferred network.
Apply Click Apply to save your changes back to the Zyxel Device.
Cancel Click Cancel to exit this screen without saving.
To Next Page
Loading...
