ZyXEL Communications Nebula FWA510 - Add or Edit Rules

Chapter 8 Wireless
Nebula Mobile Router User’s Guide
149
Note: If you enable a rule for a specific SSID, you will not be able to connect to other wireless
networks.
8.8.1 Add or Edit Rules
Click Add New Rule in the WLAN Scheduler screen, or click the Edit icon next to a scheduling rule, and
the following screen displays.
Use this screen to create a scheduling rule to permit Internet traffic from each wireless network interface.
Figure 89 Network Setting > Wireless > WLAN Scheduler > Add New Rule
The following table describes the labels in this screen.
Table 54 Network Setting > Wireless > WLAN Schedule > Add New Rule
LABEL DESCRIPTION
Active Slide the switch to the right ( )to enable this WLAN scheduler rule.
SSID Select All wireless networks if you want the rule to apply to all wireless network interfaces or
select a wireless network interface to apply the rule to.
Rule Name Enter a descriptive name for the rule.
Day Select the days of the week that you wish to apply this rule.
Time of Day Range Specify the time of the day that you wish to apply to this rule (format hh:mm).
Note: Click the check box for All days if you wish to apply the rule for the whole day
(24 hours).
Description Enter a description of the rule, usually to help identify it (its purpose).
OK Click OK to save the changes back to the Zyxel Device.
Cancel Click Cancel to close the window with changes unsaved.