Chapter 9 Home Networking
Nebula Mobile Router User’s Guide
173
The following table describes the labels in this screen.
9.5.1 Custom DHCP Configuration
Use this screen to add a DHCP option, as defined in the RFC protocols, and set its content.
Click Custom DHCP Configuration on the Network Setting > Home Networking > Custom DHCP screen to
display the following screen.
Figure 105 Network Setting > Home Networking > Custom DHCP
The following table describes the labels in this screen.
Table 61 Network Settings > Home Networking > Custom DHCP
LABEL DESCRIPTION
Custom DHCP
Configuration
Click this to add a DHCP option you want to sent to your DHCP clients.
# This field displays the index number of the entry.
Option ID This field displays the DHCP option ID.
Option Context This field displays the content of the DHCP option.
Service Name This field displays the interface group that the DHCP option is sent on.
Modify Click the Modify icon to edit an existing entry.
Click the Delete icon to remove an existing entry.
Table 62 Network Settings > Home Networking > Custom DHCP
LABEL DESCRIPTION
Option ID Enter the option ID for the additional configuration that DHCP clients can receive from a
DHCP server. For example, enter ‘6’ for DNS server configuration.
Option Context Enter additional configuration details. For example, for DHCP option 6, enter the DNS server IP
address.
You can enter up to 257 ASCII characters, except special characters like [ ” ], [ ’ ], [$], [ > ]
and [ < ].
To Next Page
Loading...
