Nebula Mobile Router User’s Guide
277
CHAPTER 29
Remote Management
29.1 Remote Management Overview
Remote management controls through which interfaces, which web services (such as HTTP, HTTPS, FTP,
Telnet, SSH and Ping) can access the Zyxel Device.
Note: The Zyxel Device is managed using the Web Configurator.
29.1.1 What You Can Do in this Chapter
• Use the MGMT Services screen to allow various approaches to access the Zyxel Device remotely from
a WAN and/or LAN connection (Section 29.2 on page 277).
• Use the Trust Domain screen to enable users to permit access from local management services by
entering specific IP addresses (Section 29.3 on page 279).
• Use MGMT Services for IP Passthrough to configure which interfaces you can use to access the Zyxel
Device for a given service (Section 29.5 on page 280).
• Use Trust Domain for IP Passthrough to view a list of public IP addresses and complete domain names
which are allowed to access the Zyxel Device (Section 29.6 on page 281),
29.2 MGMT Services
Note: The MGMT Services screen will be hidden if you enable the IP Passthrough function in
Network Setting > Broadband > Cellular IP Passthrough screen.
Use this screen to configure the interfaces through which services can access the Zyxel Device. You can
also specify service port numbers computers must use to connect to the Zyxel Device. Click
Maintenance > Remote Management > MGMT Services to open the following screen.
To Next Page
Loading...
