ZyXEL Communications Nebula FWA510 - Page 73

Chapter 5 Web Interface Tutorials
Nebula Mobile Router User’s Guide
73
• APN Manual Mode: Enable this to configure your APN cellular information manually.
• APN: Enter the Access Point Name (APN) provided by your ISP. You can type a name up to 30
printable ASCII characters, including spaces.
• Username: Type the username provided by your ISP for authentication. The allowed username is up to
31 printable ASCII characters.
• Password: Type the password provided by your ISP for authentication. The allowed password is up to
31 printable ASCII characters.
• Authentication Type: Select the authentication type (PAP, CHAP, PAP/CHAP) used by the Zyxel
Device.
• PDP Type: Select the IP address type (IPv4, IPv6, IPv4/IPv6) the Zyxel Device uses for connection.
• IP Passthrough: Enable this to turn off the routing functionality on the Zyxel Device.
• Passthrough Mode: Select Fixed to specify the MAC address of the computer using the public IP
address provided by the ISP. Otherwise, select Dynamic.
• Static Gateway Enable: Select Enable to use a static IP address for your gateway.
• Static Gateway Address: Enter the IP address of your gateway.
• Subnet mask Prefix: Enter the subnet address of your gateway.
• DHCP Lease Time: Enter the lease time provided by your DHCP server.