Chapter 1 Get to Know Your NR2101
NR2101 User’s Guide
15
Figure 7 WPS PIN
The following table describes the labels in this screen.
1.5.3 Power Saving
Use this screen to configure the screen off time. Go to Power Saving > Screen off time and select from
15s, 30s, 60s, 120s, and 10 minutes. Tap the check mark at the upper-right corner to save the changes
made. To configure the time set up for turning off WiFi automatically if no client is connected to the
NR2101, select Auto-close WiFi and then choose from 10 minutes, 20 minutes, and 30 minutes in the WiFi
auto off field. Tap the check mark at the upper-right corner to save the changes made.
Figure 8 Power Saving
Table 3 Connection Guide
LABEL DESCRIPTION
Manual Select this to change wireless network information and security modes manually.
WPS Select this to connect to the NR2101 using WPS.
WPS PIN Type the WPS password to enable WPS.
To Next Page
Loading...
