NR2101 User’s Guide
39
CHAPTER 3
Setup Wizard
3.1 Overview
This chapter provides information on the setup wizard screens in the Web Configurator.
The Web Configurator’s setup wizard helps you configure your device to access the Internet and
change the wireless LAN settings. Refer to your ISP for your Internet account information. Leave a field
blank if you do not have that information.
3.2 Access the Setup Wizard
1 Launch your web browser and enter "http://192.168.225.1" as the website address. Type "admin"
(default) as the user name, "admin" (default) as the password and click Login.
2 Click the Setup Wizard icon in the navigation panel of the Web Configurator to open the Setup Wizard
screen.
Figure 42 Title Bar: Setup Wizard Icon
3.3 Use the Setup Wizard
1 The first Setup Wizard screen displays the APN Settings screen. Use this screen to configure the APN
(Access Point Name) provided by your ISP (Internet Service Provider). Enter the user name and password
provided by your ISP, and then select your PDP Type (IPv4, IP46, or IPv4 &IPv6). Click Next.
To Next Page
Loading...
