Chapter 12 Maintenance
NR2101 User’s Guide
93
Note: If you uploaded the default configuration file you may need to change the IP address
of your computer to be in the same subnet as that of the default NR2101 IP address
(192.168.1.1).
12.5 Factory Reset
Use this screen to reset the NR2101 to the factory default mode. Click FACTORY RESET, and the following
pop-up window appears. Click OK to reboot the NR2101. System restart allows you to reboot the NR2101
without turning the power off. Wait a few minutes until the login screen appears. If the login screen does
not appear, enter the IP address of the NR2101 in your Web browser.
Figure 78 FACTORY RESET
12.6 Logout
Use this screen to log out of the NR2101’s Web Configurator. Click LOGOUT and OK to log out of the
system.
To Next Page
Loading...
