NR2101 User’s Guide
58
CHAPTER 7
WLAN & WWAN
7.1 Overview
This chapter discusses how to configure the wireless network settings in your NR2101.
The following figure provides an example of a wireless network.
Figure 51 Example of a Wireless Network
The wireless network is the part in the blue circle. In this wireless network, devices A and B are called
wireless clients. The wireless clients use the access point (AP) to interact with other devices (such as the
printer) or with the Internet. Your NR2101 is the AP.
7.1.1 What You Can Do in this Chapter
• Use the SSID Settings screen to configure the wireless LAN (2.4G/5G) and select wireless security
modes (Section 7.2 on page 60).
• Use the WPS Settings screen to activate WPS via a PIN code (Section 7.3 on page 66).
• Use the MAC Filter screen to deny wireless clients based on their MAC addresses from connecting to
the NR2101 (Section 7.4 on page 67).
• Use the WWAN Settings screen to configure the WWAN settings on the NR2101 for Internet access
(Section 7.5 on page 68).
To Next Page
Loading...
