Chapter 7 WLAN & WWAN
NR2101 User’s Guide
70
Figure 61 WWAN SETTINGS > IPv4 WWAN Settings/ IPv6 WWAN Settings
The following table describes the labels in this screen
7.5.2 WWAN Statistics
Use this screen to view detailed information about the WWAN, such as data sent and received, packets
sent and received, and network settings. Click WWAN STATISTICS and the screen appears as shown next.
Table 27 WWAN SETTINGS> IPv4 WWAN Settings/ IPv6 WWAN Settings
LABEL DESCRIPTION
IPv4 WWAN Settings
IPv4 Support Select Enable to allow the NR2101 to use IPv4. Otherwise, select Disable.
Choose Backhaul (IPv4) Select Connect to use Backhaul (IPv4). Otherwise, select Disconnect.
Current State Use this field to view information of the current IPv4 connection state.
IPv6 WWAN Settings
IPv6 Support Select Enable to allow the NR2101 to use IPv6. Otherwise, select Disable.
Choose Backhaul (IPv6) Select Connect to use Backhaul (IPv6). Otherwise, select Disconnect.
Current State Use this field to view information of the current IPv6 connection state.
To Next Page
Loading...
