Chapter 1 Get to Know Your NR2101
NR2101 User’s Guide
16
The following table describes the labels in this screen.
1.5.4 SSID
To enable a wireless client to connect to the NR2101 and set up a security mode:
1 Tap SSID on the menu screen to go to the SSID setting.
2 Select SSID password visible to view the SSID passwords.
3 To configure the SSID and password (2.4G/5G), tap 2.4G SSID/2.4G Password or 5G SSID/5GPassword on
the screen and then the Modify screen appears. Type your user name or a password of 8 to 20
characters, including spaces and special characters. Tap the check mark at the upper-right corner to
save the changes made.
4 To configure the security mode (2.4G/5G), tap 2.4G Security or 5G Security on the screen and then the
SSID Security screen appears. Select a security mode from None (Open), WPA-PSK, WPA2-PSK, and
WPA3/WPA2 mixed mode. Tap the check mark at the upper-right corner to save the changes made.
Table 4 Power Saving
LABEL DESCRIPTION
Screen off time This displays the screen off time on the NR2101. If the NR2101 is not in use for a certain
period of time, the system will automatically turn off the screen.
Auto-close WiFi Select this to enable Auto-close WiFi on the NR2101. The NR2101 will automatically
turn off Wi-Fi if no wireless client is connected to the NR2101 for a certain period of
time.
WiFi auto off This displays the time length set up to turn off WiFi automatically.
To Next Page
Loading...
