ZyXEL Communications NR2101 - About

NR2101 User’s Guide
92
The following table describes the labels in this screen.
12.4 About
Use this screen to check the software and firmware information of your NR2101.
Figure 77 About
The following table describes the labels in this screen.
Table 38 Account Configuration
LABEL DESCRIPTION
Session Timeout
(Min)
Enter how many minutes a management session can be left idle before the session times out
and click Update Timeout to save your changes back to the NR2101. The default is 300 seconds.
After it times out you have to log in with your password again. Very long idle timeouts may have
security risks. A value of "0" means a management session never times out, no matter how long it
has been left idle (not recommended).
Old Password Enter the default password or the existing password you use to access the system in this field.
New Password
Enter your new system password of between 4 and 24 characters. Note that as you tenter a
password, the screen displays as dot (.) for each character you enter. The new password must
contain one numeric, one lowercase, one upper case letter and one special character.
Confirm New
Password
Enter the new password again in this field.
Update Click this button to save your changes back to the NR2101.
Table 39 About
LABEL DESCRIPTION
Software version Use this screen to view the current software version of the NR2101.
MiFi Software
version
Use this screen to view the current MiFi software version of the NR2101.
Zyxel Firmware
version
Use this screen to view the current firmware version of the NR2101.