Chapter 1 Get to Know Your NR2101
NR2101 User’s Guide
21
Figure 16 5G WiFi PMF
The following table describes the labels in this screen.
1.5.6.4 Connected Users
Use this screen to view or manage the blacklist that blocks the devices from connecting to the NR2101.
•Select Connected Users and the following screen appears.
Figure 17 Connected Users
•You can use the Delete icon to remove a user from the blacklist.
Table 7 5G WiFi
LABEL DESCRIPTION
WiFi Enable Select this to enable 5G wireless connections.
Bandwidth
Select whether the NR2101 uses a
WiFi channel width of 20MHz, 20/40MHz, or 80/40/
20 MHz.
A standard 20MHz channel offers transfer speeds of up to 150Mbps whereas a
40MHz channel uses two standard channels and offers speeds of up to 300Mbps.
40MHz (channel bonding or dual channel) bonds two adjacent radio channels to
increase throughput. The wireless clients must also support 40MHz. It is often better to
use the 20MHz setting in a location where the environment hinders the
WiFi signal.
Select 20MHz if you want to lessen radio interference with other WiFi devices in your
neighborhood or the wireless clients do not support channel bonding.
Hide SSID Select this to hide the NR2101’s 5GSSID in the outgoing beacon frame so a station
cannot obtain the SSID through scanning using a site survey tool.
WiFi PMF
Select this to enable WiFi Protected Management Frame and enhance the security
level on the LAN.
To Next Page
Loading...
