Chapter 1 Get to Know Your NR2101
NR2101 User’s Guide
23
The following table describes the labels in this screen.
1.5.6.6 Data Usage
Use this screen to mange your monthly data usage based on your data plan.
• To view the percentage of data used on the WAN, go to Settings > Data Usage. To reset data usage
statistics on the NR2101, tap Clear.
Figure 21 Data Usage
• To configure the data usage, go to Settings > Data Usage > Settings. Select Data Usage Monitor to
enable the NR2101 to monitor how much data is used.
Figure 22 Data Usage Monitor
•Select Display data usage on home screen to enable or disable the NR2101 to display the
percentage of data used on the home screen. Tap Max Data Usage to type the maximum data
based on your current data plan. Tap the check mark at the upper-right corner to save the changes
made.
Table 8 Profile Management
LABEL DESCRIPTION
Create Use this to create an APN profile and enter the APN information provided by ISP to
the profile list.
Select Use this to select the APN profile you want to use.
Delete Use this to remove an APN profile from the profile list.
To Next Page
Loading...
