Chapter 1 Get to Know Your NR2101
NR2101 User’s Guide
30
The following table describes the labels in this screen.
1.5.6.13 Update
Use this screen to check and start firmware updates automatically.
•Select Auto check for updates to start the checking process. The following screen appears.
Figure 36 Update
The following table describes the labels in this screen.
1.5.6.14 Restore Default
Use this screen to restore the settings back to the factory default mode. This means that you will lose all
configurations you had previously, such as SSID and Password.
• Navigate to Settings > Restore Default and tap Restore to restore the NR2101 back to the factory
default mode.
Table 14 Time Setting
LABEL DESCRIPTION
Year Type the number of the year.
Month & Date Type the number of the month and date.
Hour & Minute Type the number of the time.
AM/PM Select AM or PM for the current time on the NR2101.
Table 15 Update
LABEL DESCRIPTION
Auto check for updates Select this to enable the NR2101 to check for updates automatically.
Checking for updates Select this to start the checking process.
To Next Page
Loading...
