ZyXEL Communications NR2101 - Page 47

Chapter 4 Tutorials
NR2101 User’s Guide
47
PIN Configuration
When you use the PIN configuration method, you need to check the client’s PIN number and use the
NR2101’s configuration interface (see Section 7.3 on page 66).
1 Go to your phone settings and turn on WiFi.
2 Log into NR2101’s Web Configurator and go to the WPS SETTINGS > WPS Settings screen. Click WPS
Enable to enable the PIN configuration.
3 Type the Device PIN of the wireless client and click the Connect button. Activate WPS function on the
wireless client utility screen within two minutes.
The NR2101 authenticates the wireless client and sends the proper configuration settings to the wireless
client. This may take up to two minutes. The wireless client is then able to communicate with the NR2101
securely.
The following figure shows you how to set up wireless network and security on NR2101 and wireless client
(Android smartphone in this example) by using the PIN method.