Chapter 4 Tutorials
NSA221 User’s Guide
132
5 The NSA restores the files into the share. When it finishes you can access the files.
Figure 64 Protect > Backup > Restore Archive: Progress
4.12.4 Restoring by Backup Files
If you deleted an archive backup job or the NSA or the RAID array containing the
backup job failed you cannot restore archived files by the backup job. In this
example, the NSA’s RAID array failed. You’ve replaced the hard drives and re-
configured the RAID. To restore by backup files:
1 Click Protect > Restore. Specify where the archive files are located. In this
example, enter “192.168.3.2” as the IP address, “admin” as the account name,
“1234” as the password, and “Backups” as the share name. Click Test
Connection. Click Next.
Figure 65 Protect > Restore: Step 1
To Next Page
Loading...
