ZyXEL Communications NSA221 - Create an Internal Volume Button

Chapter 4 Tutorials
NSA221 User’s Guide
71
4.2.3 Create an Internal Volume Button
If you do not have an existing volume in the Storage > Volume screen, do the
following steps to create a RAID 1 volume.
1 In the Storage > Volume screen, click Create an Internal Volume.
2 In the Disk Configuration screen, you can select the storage method.
• Type in the Volume Name for your RAID 1 volume. The volume name can be 1
to 31 characters (a-z, 0-9, " " [spaces], "_", and ".").
• Choose RAID 1 and click Apply.
This deletes all existing data in the SATA hard disk. Make sure you
have a backup of any existing data in the hard disk.