Chapter 15 Maintenance Screens
NSA221 User’s Guide
323
15.8 The Shutdown Screen
Use this screen to turn off the NSA or perform a software restart. A software
restart is faster than turning the NSA off and then turning it on again. Before
shutting down or restarting, check the System Status > Active Sessions screen
to make sure that no one is logged into the NSA or transferring files to or from the
NSA.
Click Maintenance > Shutdown to open the following screen.
Figure 183 Maintenance > Shutdown
The following table describes the labels in this screen.
When you click the Restart button a pop-up screen will appear asking you to
confirm. Click OK to continue or Cancel to quit the restart.
Figure 184 Maintenance > Shutdown > Confirm Restart
When you click the Shutdown button a pop-up screen will appear asking you to
confirm. Click OK to continue or Cancel to quit the shutdown.
Figure 185 Maintenance > Shutdown > Confirm Shutdown
15.9 Technical Reference
This section provides technical background information on the topics discussed in
this chapter.
Table 110 Maintenance > Shutdown
LABEL DESCRIPTION
Restart Click this to have the device perform a software restart.
Shutdown Click this to shut down the system and restart it again later.
To Next Page
Loading...
