Chapter 15 Maintenance Screens
NSA221 User’s Guide
311
Keep Former
Status
Select this option to have the NSA automatically restart only if it was
operating when the power failed. The NSA remains off if it was already
off when the power failed.
Always Power
On
Select this option to keep the NSA operating as much of the time as
possible. The NSA restarts automatically even if it was turned off when
the power failed.
Always Power
Off
Select this option to keep the NSA from automatically restarting when
the power is restored after a power failure. This is a computer’s
“traditional” behavior. Select this if you have other servers such as a
domain controller or DNS server that you want to start or check after a
power failure before the NSA turns on.
Power On/Off Schedule
Enable Power
Control
Schedule
Select this option to have the NSA turn itself off and on or reboot
according to the schedules you configured.
Click Edit to go to the screen where you can configure the power control
schedules.
Refer to Section 15.3.1 on page 312 for this screen.
Apply Click this to save your changes.
Reset Click this to restore previously saved settings.
Table 100 Maintenance > Power (continued)
LABEL DESCRIPTION
To Next Page
Loading...
