Chapter 2 NAS Starter Utility
NSA221 User’s Guide
33
4 Check your settings. If they are OK, click Next. Otherwise click Back. If you want
to change anything other than the user accounts, keep clicking Back until you can
change the wizard type to manual.
Figure 11 Confirm Settings
5 Wait while the NAS Starter Utility configures the NSA.
Figure 12 Setting the NAS
After the NAS Starter Utility finishes configuring the NSA, you can click Show the
directory of the NAS to see the NSA’s shares (see Section 2.5.3 on page 40) or
To Next Page
Loading...
