Chapter 2 NAS Starter Utility
NSA221 User’s Guide
39
9 If the settings are OK, click Next. Otherwise click Back. If you want to change
anything other than the user accounts, keep clicking Back until you can change
the wizard type to manual.
Figure 22 Confirm Settings
10 Wait while the NAS Starter Utility configures the NSA.
Figure 23 Setting the NAS
After the NAS Starter Utility finishes configuring the NSA, you can click Show the
directory of the NAS to see the NSA’s shares (see Section 2.5.3 on page 40) or
To Next Page
Loading...
