ZyXEL P-336M User’s Guide
19 Chapter 1 Getting Started
• WPA2/WPA (Wi-Fi Protected Access) authorizes and identifies users based with a secret
key that changes automatically at regular intervals, for example: Pre Shared Key mode
means that the home user, without a RADIUS server, will obtain a new security key every
time he or she connects to the network, vastly improving the safety of communications on
the said network.
• User-friendly configuration and diagnostic utilities.
• Connect multiple computers to a Cable or DSL modem to share a single Internet
connection.
• DHCP server enables all networked computers to automatically receive IP addresses.
• Web-based interface for easy management and configuration.
• Supports multi-connection applications.
• Equipped with four 10/100 Ethernet ports, one WAN port all with Auto MDI/MDIX.
1.3 Hardware Connection and Wizard Setup
Follow the instructions in the Quick Start Guide to connect the P-336M and configure the
wizard screens.
1.3.1 Front Panel LEDs
The following table describes the front panel LEDs.
Table 1 Front Panel LEDs
LED COLOR STATUS DESCRIPTION
PWR Off The P-336M is not receiving power.
Green On The P-336M is receiving power and ready.
Blinking The P-336M is resetting to the factory defaults.
LAN Off No device is connected to this port.
Green On An Ethernet device is connected to this port.
Blinking The P-336M is sending/receiving data on this port.
WAN Off The WAN connection is not ready, or has failed.
Green On The P-336M has a successful WAN connection.
Blinking The P-336M is sending/receiving data.
WLAN Off The WLAN connection is turned off.
Green On The WLAN is active.
Blinking The WLAN is sending/receiving data.
USB Off The USB port is currently not in use
Green Blinking (3
Times)
Windows Connect Now setup is successful.
Blinking
(Continuous)
Windows Connect Now setup is not successful.
To Next Page
Loading...
