ZyXEL Communications P-336M - Table 33 Tools: Admin

ZyXEL P-336M User’s Guide
81 Chapter 6 Status
The following table describes the labels in this screen.
Table 33 Tools: Admin
LABEL DESCRIPTION
General
Time This field displays the current system date and time.
Firmware Version This field displays the firmware version and the date created.
WAN
Connection Type This field displays the connection status.
Connection Up
Time
This field displays the time since the connection was up.
DHCP Renew This button is applicable when the P-336M uses a dynamic IP address.
Click DHCP Renew to get a new dynamic IP address.
DHCP Release This button is applicable when the P-336M uses a dynamic IP address.
Click DHCP Release to release the current IP address. You must then click DHCP
Renew to get a new IP address.
Connect This button is available when the P-336M is set to use PPPoE connection type.
Click Connect to establish an Internet connection using PPPoE.
Disconnect This button is available when the P-336M is set to use PPPoE connection type.
Click Disconnect to disconnect the Internet connection.
MAC Address This field displays the MAC address of the WAN port on the P-336M.
IP Address This field displays the WAN IP address.
Subnet Mask This field displays the WAN subnet mask.
Default Gateway This field displays the IP address of the gateway on the WAN.
Primary/
Secondary DNS
Server
This field displays the IP address(es) of the DNS server(s).
LAN
MAC Address This field displays the MAC address of the LAN port on the P-336M.
IP Address This field displays the LAN IP address.
Subnet Mask This field displays the LAN subnet mask.
DHCP Server This field displays whether the DHCP server is active or not on the LAN.
Wireless LAN
Wireless Radio This field displays whether the wireless LAN feature is active or not.
MAC Address This field displays the MAC address of the WLAN interface on the P-336M.
Network Name
(SSID)
This field displays the name of the wireless network.
Channel This field displays the wireless channel number the P-336M is using.
Turbo Mode This field displays whether the turbo mode is active or not.
Security Type This field displays the wireless LAN security type.