ZyXEL Communications P-336M - Figure 37 Tools: E-Mail; Table 31 Tools: E-Mail

ZyXEL P-336M User’s Guide
Chapter 5 Tools 74
Figure 37 Tools: E-mail
The following table describes the labels in this screen.
Table 31 Tools: E-mail
LABEL DESCRIPTION
Enable Select Enable Email Notification to activate this feature.
Email Settings
From Email
Address
Enter an e-mail as the sender.
To Email Address Enter the e-mail address to which notifications are sent.
SMTP Server
Address
SMTP (Simple Mail Transfer Protocol) is the message-exchange standard for the
Internet. SMTP enables you to move messages from one e-mail server to another.
Enter the IP address (in dotted decimal notation) of the mail server.
Enable
Authentication
Select the check box to activate SMTP authentication. If mail server authentication
is needed but this feature is disabled, you will not receive the e-mail logs.
Account Name Enter the user name (up to 31 characters) (usually the user name of a mail
account).
Password Enter the password associated with the user name above.
Verify Password Enter the password again for verification.
Email Log When
Full or On
Schedule