ZyXEL P-336M User’s Guide
57 Chapter 4 Advanced
Figure 24 Advanced: MAC Filter
The following table describes the labels in this screen.
Table 23 Advanced: MAC Filter
LABEL DESCRIPTION
Enable Select Enable MAC Address Filter to activate this setting. Clear this check box to
disable it.
Filter Settings
Mode Select only deny listed machines to block frames to/from the specified MAC
address(es).
Select only allow listed machines to forward frames to/from the specified MAC
address(es).
Filter Wireless
Clients
Select this option to apply the filter settings to the wireless clients.
Filter Wired
Clients
Select this option to apply the filter settings to the wired computers on the LAN.
Add MAC Address
Enable Select Enable to activate this filter setting. Clear this check box to disable it.
MAC Address Enter the MAC address (in six pairs of dotted haxidecimal notation) of a computer
whose traffic you want to filter. Or select a computer from the drop-down list box.
To Next Page
Loading...
