Chapter 10 Firewalls
P-79X Series User’s Guide
101
Firewall E xample: Rules
3 In the Rules screen, select the index number after that you want to add the rule. For example, if
you select “6”, your new rule becomes number 7 and the previous rule 7 (if there is one) becomes
rule 8.
4 Click Add to display the firewall rule configuration screen.
5 Select Any in the Destination Address List box and then click Delete.
6 Configure the destination address screen as follows and click Add.
Firewall Ex ample: Edit Rule: Dest ination Address
7 Use the Add >> and Remove buttons between Available Services and Selected Services list
boxes to configure it as follows. Click Apply when you are done.
To Next Page
Loading...
