Chapter 6 WAN Setup
P-79X Series User’s Guide
57
6.4 The WAN Backup Setup Screen
Use this screen to configure your P-79X’s WAN backup. Click Network > WAN > WAN Backup
Setup. This screen is not available if you set the WAN type to Ethernet in the Internet Access
Setup screen.
Note: This screen is not available when you use the P-791R v3 device.
Figure 34 Network > Internet (WAN) > WAN Backup
Generic Filter Select the generic filter(s) to control outgoing traffic. You may choose up
to 4 sets of filters.
You can configure generic filters in the Packet Filter screen. See Chapter
12 on page 119 for more details.
Back Click this to return to the previous screen without saving.
Apply Click this to save your changes.
Cancel Click this to restore your previously saved settings.
Table 18 Network > WAN > More Connections: Edit: Advanced Setup (continued)
LABEL DESCRIPTION
To Next Page
Loading...
